China Luo Yang Hengin Heavy Industry Technology

China Luo Yang Hengin Heavy Industry Technology

Home / Rotary kiln Support Roller / Support Roller Marking and Packaging
Support Roller Marking and Packaging
1.Ductile Iron Roller Station Packing 2.Cast Stell  Roller Station Packing
 
1. Marking and Packaging
1.1 Mark
Each casting shall be marked or partially marked as follows:
a) The name or identification of the supplier's factory;
B) Supplier's name;
C) Other markings required by the buyer.
When it is impossible to make a mark on the casting, the mark can be printed on the casting label.

2. Quality Certificate
All qualified castings shall be accompanied by quality certificates. Certificates include;
a) The name or identification of the supplier's factory;
b) The name of the casting;
c) Drawing number or order contract number;
d) Material number and furnace number, supply status;
e) Chemical composition, mechanical properties and non-destructive testing results;
f) Exit date, etc.

3. Painting and Packaging
Castings shall be coated after passing the inspection. The coating shall comply with the requirements of JB/T 5000.12-2007 and the packaging shall comply with the requirements of JBT 5000.13-2007.
 
 
 
 
 

 
123123
123123123